Department of the Interior Low & Deep Centre Roof Console for Toyota Landcruiser 79 Series Dual Cab

Department of the Interior Roof Console for Toyota Landcruiser 79 Series Dual Cab

Centre roof consoles are vehicle specific and custom-built to suit each customer's requirements. Customising can include cutting holes to suit your particular radio, lighting and storage, gauges or any other console accessories. The console can also be upholstered to match your vehicle's interior trim.

Please find 3 options listed below with specific details and pricing. 
Design #1 ($635): 

The following accessories are included in this Flat Base Centre Roof Console (Design 1):

• Storage and netting on passenger and driver side with internal carpet lining
• Provision to refit the factory Toyota interior light

Design #2 ($740): 

The following accessories are included in this Flat Base Centre Roof Console (Design 2):

• Storage and netting on passenger and driver side with internal carpet lining
• LED Map Lights with 2 on/ off switches
• Provision to refit the factory Toyota interior light

UHF is not included in the pricing.

Design #3 ($782): 

The following accessories are included in this Flat Base Centre Roof Console (Design 3):

• Storage and netting on passenger and driver side with internal carpet lining
• LED Map Lights with 2 on/ off switches
• Provision to refit the factory Toyota interior light
• Cut hole and install UHF radio

The UHF radio is not included in the pricing.

FEATURES:

• Robust - Durable for off-road driving. Manufactured using steel and hardwood plywood - NO PLASTIC.
• The shape of the base of the console can be custom made to suit your radio(s) and specific requirements.
• Radio holes and storage openings etc. cut to suit your requirements and accessories.
• Designed for maximum headroom without interfering with the sun visors or any other functions of the vehicle.
• Upholstered in a vinyl or velour finish to match the vehicle's interior. The most popular colour are light grey, dark grey and tan.
• This console is mounted without drilling any holes in the vehicle.  It uses the rear-view mirror screws, the grab handle captive nuts and the interior light screw holes. The interior light then re-mounts into a pre-cut hole in the console.   
• As shown in the photo above, if required a "centre digital clock housing" can be installed. Cost $120 plus the accessory.
• Designed so the radio curly cords are out of view.
• Professional fitting service available.

Your centre roof console will be designed to suit your specific model vehicle. It will neatly follow the contours of your hood lining and will be the ideal width to suit the distance between your sun visors. The length of the console takes into account the mounting system for the console, the shape of the cabin and when applicable, headroom for the rear seat passengers. When calculating the depth of the console we allow for maximum headroom and a clear view of the rear vision mirror. As no two model vehicles are the same the Department of the Interior's "vehicle-specific" consoles is the best available.

In addition to being "vehicle-specific" each console is "custom-built" to suit your requirements - nobody else does that!  When custom building your console a slim line console for maximum headroom or a deeper console for maximum storage. The console's radio housing(s) can be made as small as your radio(s) will allow more headroom and moving your radio(s) closer to the windscreen for better access. Another advantage of this versatility of design, most modern radios have an LCD (liquid crystal display) screen. It is easier to read the LCD when you are looking square onto the screen. Where possible, the angle on the console's facia panel is changed to suit the radio being fitted.

The Department of the Interior is Australia's leading manufacturer of roof and floor consoles. With over 40 years of experience under its belt, each item manufactured to an exact fit for the contours of the vehicle, plus a personalised service to get you exactly what you want, it's any wonder why it's hard to go past the Department of the Interior.

Floor consoles are vehicle specific and custom-built to suit each customer's requirements. Customising can include cutting holes to suit your particular radio, lighting and storage, gauges or any other console accessories. The console can also be upholstered to match your vehicle's interior trim.

Specifications